Hydrogenated Styrenic Thermoplastic Elastomer (SEBS) Tuftec™ P5051
Applications
Physical Form
- Supplied as a dusted, dence pellet
Features and Benefits
- PS/PP alloy compatibilizer
- Excellent impact modifier for PS and PPE
Regulations
- Regulation (EU) No 10/2011
Characteristics
| Property | Test Method | Unit | Value |
|---|---|---|---|
| Density | ISO 1183 | g/cm3 | 0.94 |
| MFR 190°C, 2.16kg Load | ISO 1133 | g/10 min | 4.0 |
| Hardness Durometer Type A |
ISO 7619 | °Shore A | 93 |
| Tensile Strength Dumbbell: Type 1A 500 mm/min |
ISO 37 | MPa | 31.0 |
| Elongation Dumbbell: Type 1A 500 mm/min |
ISO 37 | % | 700 |
| 300% Tensile Stress | ISO 37 | MPa | 7.0 |
| Styrene / Ethylene-Butylene Ratio | Asahi Kasei Method | – | 47/53 |
Please note that all data and values are given as typical results obtained with the indicated test methods for purposes of basic reference in grade selection only, and not as any product specification or warranty of any nature, and are subject to change without notice.
Please refer to Terms and Conditions and Privacy Policy
IMPORTANT NOTICE REGARDING MEDICAL APPLICATIONS
We, Asahi Kasei Group, request that customers who are considering using our products in medical, pharmaceutical, cosmetic and other related applications (hereinafter collectively called “Medical Applications”) shall contact us and confirm our policy on Medical Applications in advance. Information herein regarding conformity to certain laws and regulations are as of January, 2015. Please consult with us for the latest status. We make no guarantees or warranties, express or implied, concerning the suitability of our products for use in Medical Applications. It is not our responsibility to determine if our products are safe, lawful, and technically suitable for intended applications.
