Hydrogenated Styrenic Thermoplastic Elastomer (SEBS) Tuftec™ H1041

Asahi Kasei Tuftec™ H1041 is good for easy peel film application. It can be also used as a modifier for a variety of plastics with its superior balance of mechanical property and melt flowability.

Applications

Physical Form

Supplied as a dusted, dence pellet

Features and Benefits

Good mechanical property at low temperature
Easy peel property

Regulations

FDA 21 CFR 177.1810
Regulation (EU) No 10/2011

Characteristics

Property	Test Method	Unit	Value
Specific Gravity	ISO 1183	g/cm³	0.91
MFR 230°C, 2.16kg Load	ISO 1133	g/10 min	5.0
Hardness Durometer Type A	ISO 7619	°Shore A	84
Tensile Strength Dumbbell: Type 1A 500 mm/min	ISO 37	MPa	21.6
Elongation Dumbbell: Type 1A 500 mm/min	ISO 37	%	650
300% Tensile Stress	ISO 37	MPa	3.4
Styrene / Ethylene-Butylene Ratio	Asahi Kasei Method	–	30/70

Please note that all data and values are given as typical results obtained with the indicated test methods for purposes of basic reference in grade selection only, and not as any product specification or warranty of any nature, and are subject to change without notice.

Please refer to Terms and Conditions and Privacy Policy

IMPORTANT NOTICE REGARDING MEDICAL APPLICATIONS

We, Asahi Kasei Group, request that customers who are considering using our products in medical, pharmaceutical, cosmetic and other related applications (hereinafter collectively called “Medical Applications”) shall contact us and confirm our policy on Medical Applications in advance. Information herein regarding conformity to certain laws and regulations are as of January, 2015. Please consult with us for the latest status. We make no guarantees or warranties, express or implied, concerning the suitability of our products for use in Medical Applications. It is not our responsibility to determine if our products are safe, lawful, and technically suitable for intended applications.

TuftecTM