TuftecTM

Hydrogenated Styrenic Thermoplastic Elastomer (SEBS) Tuftec™ MP10

Asahi Kasei Tuftec™ MP10 is amine-modified SEBS. MP10 can be used as a modifier for engineering plastics such as polyamide (PA) or polyester (PEs), polylactic acid (PLA) and thermoplastic polyurethane (TPU). It is particularly suitable for an adhesive to TPU. It is also used as a compatibilizer of PS or olefinic resin and polar resins. It shows excellent adhesion to inorganic fillers, which can achieve good dispersion of inorganic fillers into plastics.

Applications

Physical Form

  • Supplied as a dusted, dence pellet

Features and Benefits

  • Excellent impact modifier for PA or PEs
  • TPU Modifier
  • 2K molding
  • Adhesion to metal or polar resin
  • Compatibilizer for inorganic filler

Regulations

  • FDA 21 CFR 177.1810

Characteristics

Property Test Method Unit Value
Specific Gravity ISO 1183 g/cm3 0.91
MFR 230°C, 2.16kg Load ISO 1133 g/10 min 4.0
Hardness
Durometer Type A
ISO 7619 °Shore A 89
Tensile Strength
Dumbbell: Type 1A 500 mm/min
ISO 37 MPa 28.0
Elongation
Dumbbell: Type 1A 500 mm/min
ISO 37 % 600
300% Tensile Stress ISO 37 MPa 5.6
Styrene / Ethylene-Butylene Ratio Asahi Kasei Method 30/70

Please note that all data and values are given as typical results obtained with the indicated test methods for purposes of basic reference in grade selection only, and not as any product specification or warranty of any nature, and are subject to change without notice.

Please refer to Terms and Conditions and Privacy Policy

IMPORTANT NOTICE REGARDING MEDICAL APPLICATIONS

We, Asahi Kasei Group, request that customers who are considering using our products in medical, pharmaceutical, cosmetic and other related applications (hereinafter collectively called “Medical Applications”) shall contact us and confirm our policy on Medical Applications in advance. Information herein regarding conformity to certain laws and regulations are as of January, 2015. Please consult with us for the latest status. We make no guarantees or warranties, express or implied, concerning the suitability of our products for use in Medical Applications. It is not our responsibility to determine if our products are safe, lawful, and technically suitable for intended applications.

pagetop