TuftecTM

Hydrogenated Styrenic Thermoplastic Eastomer (SEBS) Tuftec™ H1052

Asahi Kasei Tuftec™ H1052 shows moderate adhesion and is good for adhesive layer of protective films by multi-layer extruding process or easy peel films. It is also used as an impact modifier of polypropylene (PP). Its excellent stretch property provides stretch films such as food wrapping film.

Applications

Physical Form

  • Supplied as a dusted, dence pellet 2 types of dusting agents

Features and Benefits

  • Good mechanical property at low temperature
  • Excellent impact modifier for PP
  • Adhesive for protect film
  • Easy peal property
  • Strong heat seal property
  • Excellent stretch property

Regulations

  • FDA 21 CFR 177.1810
  • Regulation (EU) No 10/2011

Characteristics

Property Test Method Unit Value
Specific Gravity ISO 1183 g/cm3 0.89
MFR 230°C, 2.16kg Load ISO 1133 g/10 min 13.0
Hardness
Durometer Type A
ISO 7619 °Shore A 67
Tensile Strength
Dumbbell: Type 1A 500 mm/min
ISO 37 MPa 11.8
Elongation
Dumbbell: Type 1A 500 mm/min
ISO 37 % 700
300% Tensile Stress ISO 37 MPa 2.5
Styrene / Ethylene-Butylene Ratio Asahi Kasei Method 20/80

Please note that all data and values are given as typical results obtained with the indicated test methods for purposes of basic reference in grade selection only, and not as any product specification or warranty of any nature, and are subject to change without notice.

Please refer to Terms and Conditions and Privacy Policy

IMPORTANT NOTICE REGARDING MEDICAL APPLICATIONS

We, Asahi Kasei Group, request that customers who are considering using our products in medical, pharmaceutical, cosmetic and other related applications (hereinafter collectively called “Medical Applications”) shall contact us and confirm our policy on Medical Applications in advance. Information herein regarding conformity to certain laws and regulations are as of January, 2015. Please consult with us for the latest status. We make no guarantees or warranties, express or implied, concerning the suitability of our products for use in Medical Applications. It is not our responsibility to determine if our products are safe, lawful, and technically suitable for intended applications.

pagetop