Relatively low molecular weight and
thus high processability and flowability, along with
superior balance of mechanical strength as elastomer
and elongation. It is supplied in pellet form.
Olefinic and styrenic
resins modifier, for high impact strength. Compatibilizer.
Adhesives and sealants component. Base polymer of SEBS
molding compounds. IC trays
Basic characteristics of Tuftec™
H1041
Property
Test method
Value
Density (g/cm3)
ISO 1183
0.91
MFR (g/10 min)
230 °C, 2.16 kg load
ISO 1133
5
Hardness
Durometer Type A
ISO 7619
84°
Tensile strength (MPa)
Dumbbell: Type 1A 500 mm/min
ISO 37
21.6
Elongation (%)
Dumbbell: Type 1A 500 mm/min
650
300% tensile stress
(MPa)
3.4
Styrene/(ethylene/butylene)
(wt%)
Asahi Kasei method
30/70
Product
form
–
Pellet
Please note that all data
and values are given as typical results obtained with the
indicated test methods for purposes of basic reference in
grade selection only, and not as any product specification
or warranty of any nature, and are subject to change without
notice.
