| Essentials |
|
Lower solution viscosity than Asaprene™
T-430, designed for pressure-sensitive and other adhesives
modification. Higher level of processability than Asaprene™
T-430 in asphalt modification. It is supplied in crumb
form.
Contact
us for information on handling and use.
|
|
| Applications |
| Adhesives and sealants
component, meeting requirements for high adhesiveness
and low viscosity. Asphalt modifier, meeting requirements
for high softening point and processability. |
|
| Basic characteristics of Asaprene™ T-432 |
| Property |
Test method |
Value |
| Specific gravity |
ASTM D 297 |
0.94 |
|
MFR, E (g/10 min)
190°C, 2.16 kg load
|
|
ASTM D
1238 |
0 |
|
MFR, G (g/10 min)
200°C, 5 kg load
|
|
<1 |
| Hardness, Type A |
JIS K 6253 |
75 |
| Tensile strength (MPa) |
JIS K 6251
|
29 |
| Elongation (%) |
750 |
| 300% tensile stress
(MPa) |
2.0 |
| Viscosity as 25% solution
in toluene (mPa s) |
Asahi Kasei method |
3,100 |
| Styrene/butadiene (wt%) |
Asahi Kasei method |
30/70 |
| Product form |
– |
Crumb |
|
Test conditions
- Test piece: Compression-molded
sheet, 2-mm thick, #3 JIS dumbbell shape.
- Roll kneading temp.: 120°C~130°C.
- Compression molding:
Preheating, 160°C 5 min; compression, 80 kg/cm2
160°C 5 min; cooling, 3 min.
- Test measurements temp.:
23°C.
|
| Please note that all data
and values are given as typical results obtained with the
indicated test methods for purposes of basic reference in
grade selection only, and not as any product specification
or warranty of any nature, and are subject to change without
notice. |
To top |
